SAE MA3365A BOLT, MACHINE - HEX HEAD, DRILLED, FULL SHANK, LONG THREAD, CORROSION RESISTANT STEEL (UNS S66286), METRIC standard by SAE International, 06/29/2021
SAE AS9488 SCREW, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1640-36 UNJF-3A standard by SAE International, 06/29/2021
SAE AS9297C BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A standard by SAE International, 06/29/2021
SAE AMSS4383C Sealing Compound, Topcoat, Fuel Tank, Buna-N Type standard by SAE International, 06/29/2021
SAE AMS5353F Steel, Corrosion-Resistant, Investment Castings 16Cr - 1.9Ni - 0.08N As Cast standard by SAE International, 06/29/2021
SAE AMS4128E Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching standard by SAE International, 06/28/2021
SAE AS6098B FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL ON SIDE, FLARED, 37¿¿ SPHERICAL standard by SAE International, 06/28/2021
SAE AS6095B FITTING, 37¿¿ SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, TEE standard by SAE International, 06/28/2021
SAE AS6094B FITTING, 37¿¿ SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 45¿¿ standard by SAE International, 06/28/2021
SAE AS6093B FITTING, 37¿¿ SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 90¿¿ standard by SAE International, 06/28/2021
SAE AS6092B FITTING, 37¿¿ SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 75¿¿ standard by SAE International, 06/28/2021
SAE AS1895/7H SEAL, TYPE I AND II STANDARD AND LOW PROFILE standard by SAE International, 06/22/2021