SAE AMS4050K Aluminum Alloy, Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated, Stress Relieved, and Overaged standard by SAE International, 04/22/2021
SAE J1979DA_202104 J1979-DA, Digital Annex of E/E Diagnostic Test Modes standard by SAE International, 04/21/2021
SAE AMS2244D Tolerances Titanium and Titanium Alloy Tubing standard by SAE International, 04/19/2021
SAE MA3369A BOLT, MACHINE-HEX HEAD, DRILLED, PD SHANK, LONG THREAD, NICKEL ALLOY UNS N07718, METRIC standard by SAE International, 04/19/2021
SAE AS9589B BOLT, MACHINE-HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL (UNS S66286), .5625-18 UNJF-3A standard by SAE International, 04/19/2021
SAE AS9489E BOLT, MACHINE - HEXAGON HEAD, FULL SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A standard by SAE International, 04/19/2021
SAE AS9400C BOLT, TEE HEAD - CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, CHAMFERED, .3750-24 UNJF-3A standard by SAE International, 04/19/2021
SAE AS7467C Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi Stress Rupture Rated Procurement Specification standard by SAE International, 04/19/2021
SAE AS81714/11B TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, SINGLE, SERIES I standard by SAE International, 04/14/2021
SAE AMS4116K Aluminum Alloy, Bars, Rods, and Wire 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4) Cold Finished, Solution Heat Treated and Naturally Aged standard by SAE International, 04/14/2021
SAE AMS4115K Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash Welded Rings and Stock for Flash Welded Rings Annealed 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) standard by SAE International, 04/14/2021
SAE J2545_202104 Test Procedures for Non-SAE Hydraulic Hoses (Stabilized: Apr 2021) standard by SAE International, 04/14/2021