SAE AS25281C CLAMP, LOOP, PLASTIC, WIRE SUPPORT standard by SAE International, 07/29/2019
SAE AS1495B Shaft Nut and Keywasher Installation Dimensions for standard by SAE International, 07/29/2019
SAE ARP6407 IVHM Design Guidelines standard by SAE International, 07/29/2019
SAE AS4139D FITTING ASSY, TEE, REDUCER, SWIVEL ON RUN, REDUCED BODY, FLARELESS standard by SAE International, 07/29/2019
SAE AS4138D Fitting Assy, Elbow, Reducer, 90¿¿, Swivel, Reduced Body, Flareless standard by SAE International, 07/29/2019
SAE AS4137D FITTING ASSY, ELBOW, REDUCER, 45¿¿, SWIVEL, REDUCED BODY, FLARELESS standard by SAE International, 07/29/2019
SAE AS4136D CROSS, STANDARD AND REDUCER, REDUCED BODY, FLARELESS standard by SAE International, 07/29/2019
SAE AS4135D TEE, BULKHEAD ON SIDE, STANDARD AND REDUCER, REDUCED BODY, FLARELESS standard by SAE International, 07/29/2019
SAE AS4134E TEE, BULKHEAD ON RUN, STANDARD AND REDUCER, REDUCED BODY, FLARELESS standard by SAE International, 07/29/2019
SAE AS4133D TEE, STANDARD AND REDUCER, REDUCED BODY, FLARELESS standard by SAE International, 07/29/2019
SAE AMS4611J Brass, Naval, Bars and Rods 60.5Cu - 38.7Zn - 0.8Sn Half Hard (H02) standard by SAE International, 07/26/2019
SAE AMS6378H Steel Bars 1.0Cr - 0.20Mo - 0.45Se (0.39 - 0.48C) (4142H Modified) Die-Drawn, 130 ksi (896 MPa) Yield Strength Free Machining standard by SAE International, 07/26/2019