SAE AMS5121L Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed standard by SAE International, 05/10/2019
SAE AMS5044K Steel, Sheet and Strip 0.15 Carbon, Maximum Half Hard Temper standard by SAE International, 05/10/2019
SAE AMS4413B Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged standard by SAE International, 05/10/2019
SAE AMS3320J Elastomer: Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced Heat and Weather Resistant 60 to 80 Type ¿¿¿A¿¿¿ Durometer Hardness standard by SAE International, 05/10/2019
SAE AMS3204N Rubber Synthetic Low-Temperature Resistant 25 - 35 standard by SAE International, 05/10/2019
SAE AMS2261L Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire standard by SAE International, 05/10/2019
SAE AMS2477C Conversion Coating for Aluminum Alloys Low Electrical Resistance Coating standard by SAE International, 05/10/2019
SAE J283_201905 Test Procedure for Measuring Hydraulic Lift Capacity on Agricultural Tractors Equipped with Three-Point Hitch standard by SAE International, 05/10/2019
SAE J2295M_201905 Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric) (Stabilized: May 2019) standard by SAE International, 05/10/2019
SAE J180_201905 Electrical Charging Systems for Off-Road Work Machines standard by SAE International, 05/10/2019
SAE J1360_201905 Product Identification Numbering System of Off-Road Work Machines (Stabilized: May 2019) standard by SAE International, 05/10/2019
SAE AS6285B Aircraft Ground Deicing/Anti-Icing Processes standard by SAE International, 05/09/2019