SAE AMS3670C Molded or Extruded Bar, Rod, and Shapes Made from Polyamide-Imide (PAI) Plastic Material Both Filled and Unfilled Grades for High-Impact Strength and Mechanical Strength Applications in High Temperature Environments standard by SAE International, 05/19/2021
SAE AMS3670/5D Bars, Rods, and Shapes Produced from 30% Carbon Fiber Filled Polyamide-Imide (PAI) Material standard by SAE International, 05/19/2021
SAE AMS5791D Cobalt Alloy, Powder, Plasma Spray 56.5Co - 25.5Cr - 10.5Ni - 7.5W standard by SAE International, 05/19/2021
SAE AMS3670/4D Bar, Rod, and Shapes Produced from 30% Glass Fiber Filled Polyamide-Imide (PAI) Material standard by SAE International, 05/19/2021
SAE AMS3670/2C Molded or Extruded Bar, Rod, and Shapes Produced from 20% Graphite ¿¿¿ 3% Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material standard by SAE International, 05/19/2021
SAE AMS3670/1C Bars, Rods, and Shapes Produced from Unfilled Polyamide-Imide (PAI) Material standard by SAE International, 05/19/2021
SAE AS31351A CONNECTOR, RECEPTACLE, ELECTRIC, DUMMY STOWAGE, WALL MOUNTING FLANGE, PUSH-PULL COUPLING (SERIES 1 AND 2 CONNECTORS) standard by SAE International, 05/18/2021
SAE AMS3670/3C Bar, Rod, and Shapes Produced from 12% Graphite - 3% Polytetrafluoroethylene (PTFE) Filled Polyamide-Imide (PAI) Material standard by SAE International, 05/19/2021
SAE AS85421C Fittings, Tube, Fluid Systems, Separable, Beam Seal, 3000/4000 psi, General Specification for standard by SAE International, 05/18/2021
SAE AS1032H FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON RUN, FLARED standard by SAE International, 05/18/2021
SAE AS1031G FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARED standard by SAE International, 05/18/2021
SAE AMS5719E Steel Bars, Wire, Forgings and Forging Stock, Mechanical Tubing, Rings, and Extrusions, Corrosion-Resistant 11.8Cr - 2.5Ni - 1.8Mo - 0.33V (0.08 - 0.15C) Annealed, Vacuum Arc or Electroslag Remelted standard by SAE International, 05/18/2021