SAE EIA649_1A Configuration Management Requirements for Defense Contracts standard by SAE International, 08/10/2020
SAE AS9771A PACKING, PREFORMED - AMS3650, SEAL standard by SAE International, 08/10/2020
SAE ARP5580 Recommended Failure Modes and Effects Analysis (FMEA) Practices for Non-Automobile Applications standard by SAE International, 08/07/2020
SAE AMS4153M Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated standard by SAE International, 08/04/2020
SAE AMS5706N Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 ¿¿F Solution Heat Treated standard by SAE International, 08/04/2020
SAE AMS5667P Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable standard by SAE International, 08/04/2020
SAE AMS5050L Steel Tubing, Seamless 0.15 Carbon Maximum Annealed standard by SAE International, 08/04/2020
SAE AMS4907M Titanium Alloy, Sheet, Strip, and Plate 6.0Al - 4.0V, Extra Low Interstitial Annealed standard by SAE International, 08/04/2020
SAE AIR6825 Identification and Assessment of Damage to Composite Aircraft Structures Training Document standard by SAE International, 08/03/2020
SAE AS5900D Standard Test Method for Aerodynamic Acceptance of AMS1424 and AMS1428 Aircraft Deicing/Anti-Icing Fluids standard by SAE International, 08/03/2020
SAE AS5528E Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting standard by SAE International, 08/03/2020
SAE AS5270A Bolts, Screws and Studs, Nickel Alloy, UNS N07718 Work-Strengthened, Tensile Strength 220 ksi Procurement Specification standard by SAE International, 08/03/2020