SAE AMS5661G Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe Consumable Electrode or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated standard by SAE International, 08/17/2018
SAE AMS5903C Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength standard by SAE International, 08/17/2018
SAE AIR1362D Aerospace Hydraulic Fluids Physical Properties standard by SAE International, 08/16/2018
SAE AMS5893C Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8 (Cb + Ta)(Nb + Ta) - 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion standard by SAE International, 08/16/2018
SAE AMS4674H Nickel - Copper Alloy, Corrosion-Resistant, Bars and Forgings 67Ni - 30Cu - 0.04S Free Machining standard by SAE International, 08/16/2018
SAE ARP5061A Guidelines for Testing and Support of Aerospace, Fiber Optic, Inter-Connect Systems standard by SAE International, 08/16/2018
SAE AS9375C GASKET ¿¿¿ METAL O-RING .094 TUBE X .010 WALL, SILVER PLATED, CRES ¿¿¿ UNS S32100 (Stabilized: Aug 2018) standard by SAE International, 08/16/2018
SAE AS85049/152A CONNECTOR ACCESSORIES, ELECTRICAL, RFI/EMI, STRAIN RELIEF, 45¿¿, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) standard by SAE International, 08/16/2018
SAE AS8030 Requirements for an Electronic Materials and Processes Management Plan standard by SAE International, 08/16/2018
SAE AS6062A JAUS Mission Spooling Service Set standard by SAE International, 08/16/2018
SAE AMS5383F Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.60Al - 18Fe Vacuum Melted Homogenization and Solution Heat Treated standard by SAE International, 08/16/2018
SAE AMS5360G Steel, Corrosion and Heat-Resistant, Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat Treated standard by SAE International, 08/15/2018