SAE AMS5905C Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (302) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength standard by SAE International, 08/08/2018
SAE AMS5859E Steel, Corrosion Resistant, Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.30Cb - 1.5Cu Consumable Electrode Melted, Solution Heat Treated Precipitation Hardenable standard by SAE International, 08/08/2018
SAE AMS5398H Steel, Corrosion-Resistant, Sand and Centrifugal Castings 16Cr - 4.1Ni - 0.22Cb (Nb) - 2.8Cu Solution Heat Treated standard by SAE International, 08/08/2018
SAE AMS4988D Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated standard by SAE International, 08/08/2018
SAE AMS4937E Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 6V - 2Sn Beta Extruded Plus Annealed, Heat Treatable standard by SAE International, 08/08/2018
SAE AMS4902L Titanium Sheet, Strip, and Plate Commercially Pure Annealed 40.0 ksi (276 MPa) Yield Strength standard by SAE International, 08/08/2018
SAE AMS4898E Titanium Alloy, Sheet 6Al - 2Sn - 2Zr - 2Mo - 2Cr - 0.15Si Annealed standard by SAE International, 08/08/2018
SAE AMS4373 Aluminum Alloy, Rolled, Drawn or Cold Finished Bar, Rod, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017; -O or when ordered -F) standard by SAE International, 08/08/2018
SAE AMS4247C Aluminum Alloy, Hand Forgings 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7352) Solution Heat Treated, Stress Relieved by Compression, and Precipitation Heat Treated standard by SAE International, 08/08/2018
SAE AMS3224A Nitrile-Butadiene Rubber Fuel, Fire, and Ozone Resistant 65 ¿¿¿ 75 standard by SAE International, 08/08/2018
SAE AMS3200L Butadiene Acrylonitrile (NBR) Rubber Petroleum-Base Hydraulic Fluid Resistant 55 - 65 standard by SAE International, 08/08/2018
SAE AMS2759/2H Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher standard by SAE International, 08/08/2018