SAE AS39029/36B CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-28748/9 CONNECTORS) standard by SAE International, 07/24/2018
SAE AS85049/144A CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, NON-SELF LOCKING AND SELF LOCKING, MS ¿¿¿V¿¿¿ THREAD, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, AS50151 SERIES II & III, AS81703 SERIES III, MIL-DTL-26482 SERIES II AND AS95234 CONNECTORS) standard by SAE International, 07/24/2018
SAE AS598A Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems standard by SAE International, 07/24/2018
SAE ARP5764 Aerospace Active Inceptor Systems for Aircraft Flight and Engine Controls standard by SAE International, 07/24/2018
SAE AIR4253B Description of Actuation Systems for Aircraft With Fly-By-Wire Flight Control Systems standard by SAE International, 07/24/2018
SAE AMS3379 Sealing Compound, Polysulfide Rubber Preformed Strips for Sealing Removable Doors, Skins, and Panels standard by SAE International, 07/23/2018
SAE J2711_201807 Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles (Stabilized: Jul 2018) standard by SAE International, 07/23/2018
SAE AMS5552H Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 46Fe ¿¿¿ 20.5Cr ¿¿¿ 32Ni ¿¿¿ 1.1Ti Annealed (Stabilized: Jul 2018) standard by SAE International, 07/18/2018
SAE J2836_201807 Instructions for Using Plug-In Electric Vehicle (PEV) Communications, Interoperability and Security Documents standard by SAE International, 07/18/2018
SAE AS39029/73B CONTACTS, ELECTRICAL CONNECTORS, SOCKET, SOLDER, REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-83723 SERIES III AND MIL-DTL-83527 CONNECTORS) standard by SAE International, 07/18/2018
SAE AMS6515B Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 12.0Co - 4.9Mo - 1.40Ti - 0.10Al Double Vacuum Melted, Annealed standard by SAE International, 07/18/2018
SAE AMS6459F Steel, Welding Wire 1.0Cr - 1.0Mo - 0.12V (0.18 - 0.23C) Vacuum Melted standard by SAE International, 07/17/2018