SAE AMS4339B Aluminum Alloy, Rolled or Cold Finished Bars and Rods 4.4Cu - 1.5Mg - 0.60Mn (2024-T851) Solution Heat Treated, Cold Worked, and Artificially Aged standard by SAE International, 02/15/2018
SAE AMS4326A Aluminum Alloy, 2013, Extruded Bar, Rod, and Profiles 1.0Mg - 0.80Si - 1.8Cu - 0.20Cr (2013 -T6511) Solution Heat Treated, Stress-Relieved by Stretching, and Aged standard by SAE International, 02/15/2018
SAE AMS4120S Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally Aged (T4) Solution Heat Treated, Cold Worked, and Naturally Aged (T351) standard by SAE International, 02/15/2018
SAE AMS4040P Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024-O with 1 ¿¿% Alclad); Annealed standard by SAE International, 02/15/2018
SAE AMS03_18A Chromate Conversion Coatings (Chromate Filming Treatments) Grades: Standard and Brushing for Aluminum and Aluminum Alloys (Stabilized: Feb 2018) standard by SAE International, 02/15/2018
SAE AMS03_17A Electro-Deposition of Gold (Stabilized: Feb 2018) standard by SAE International, 02/15/2018
SAE AIR5771A The Measurement of Engine Thrust in an Altitude Test Facility standard by SAE International, 02/14/2018
SAE ARP926C Fault/Failure Analysis Procedure (Stabilized: Feb 2018) standard by SAE International, 02/14/2018
SAE ARP1834B Fault/Failure Analysis For Digital Systems and Equipment (Stabilized: Feb 2018) standard by SAE International, 02/14/2018
SAE GEIASTD0005_3A Performance Testing for Aerospace and High Performance Electronic Interconnects Containing Pb-free Solder and Finishes standard by SAE International, 02/12/2018
SAE AMS5714E Alloy Bars, Forgings, and Rings, Corrosion and Heat-Resistant 73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0Fe Precipitation-Hardenable standard by SAE International, 02/12/2018
SAE AMS5702E Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1750 ¿¿F (954 ¿¿C) Solution Heat Treated standard by SAE International, 02/12/2018