SAE J2980_201804 Considerations for ISO 26262 ASIL Hazard Classification standard by SAE International, 04/28/2018
SAE AMS2759/11A Stress Relief of Steel Parts standard by SAE International, 04/28/2018
SAE AMS2759/1F Heat Treatment of Carbon and Low-Alloy Steel Parts, Minimum Tensile Strength Below 220 ksi (1517 MPa) standard by SAE International, 04/28/2018
SAE AMS2759/2G Heat Treatment of Low-Alloy Steel Parts, Minimum Tensile Strength 220 ksi (1517 MPa) and Higher standard by SAE International, 04/28/2018
SAE AMS2759/3G Heat Treatment, Precipitation-Hardening Corrosion-Resistant, Maraging, and Secondary Hardening Steel Parts standard by SAE International, 04/28/2018
SAE AMS2759/4D Heat Treatment, Austenitic Corrosion-Resistant Steel Parts standard by SAE International, 04/28/2018
SAE AMS2759/5E Heat Treatment, Martensitic Corrosion-Resistant Steel Parts standard by SAE International, 04/28/2018
SAE AMS2759F Heat Treatment of Steel Parts, General Requirements standard by SAE International, 04/28/2018
SAE AMS4332A Aluminum Alloy, Extruded Profiles (7349-T76511) 8.1Zn - 1.7Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress-Relieved, and Overaged standard by SAE International, 04/28/2018
SAE AMS4616G Silicon Bronze Bars, Rods, Forgings, and Tubing, 92Cu - 3.2Si - 2.8Zn - 1.5Fe, Stress Relieved standard by SAE International, 04/28/2018
SAE AMS4991F Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional standard by SAE International, 04/28/2018
SAE J3068_201804 Electric Vehicle Power Transfer System Using a Three-Phase Capable Coupler standard by SAE International, 04/25/2018