M00021998
New product
ASTM D3322-82(2017) Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
standard by ASTM International, 06/01/2017
In stock
Warning: Last items in stock!
Availability date: 07/24/2021
1.1This practice covers the selection and use of procedures for testing primers and primer surfacers. The test methods included are listed in Table 1.
Property | Section | ASTM Method | Federal Test |
Abrasion resistance: | |||
Air blast abrasion tester | 6.2 | D658 | ... |
Adhesion: | |||
Scrape adhesion | 6.3 | D2197 | 6303.1 |
Parallel-groove adhesion | 6.3 | D2197 | 6302.1 |
Tape adhesion | 6.3 | D3359 | ... |
Chemical resistance: | |||
Household chemical resistance | 6.4.2 | D1308 | ... |
Detergent resistance | 6.4.3 | D2248 | |
Hydrocarbon resistance | 6.4.4 | ... | 6011 |
Chip resistance | 6.5 | D3170 | ... |
Color difference: | |||
Visual evaluation | 6.6 | D1729 | 4249.1 |
Cracking resistance | 6.7 | D2246 | ... |
Elongation: | |||
Conical mandrel | 6.8 | D522 | ... |
Filiform corrosion | 6.9 | D2803 | ... |
Gloss | 6.10 | D523 | 6101 |
Hardness | 6.11 | D1474 | ... |
Holdout | 6.12 | C540 | ... |
Mildew resistance | 6.13 | ... | 6271.1 |
Outdoor exposure: | |||
Blistering | 6.14.2 | D714 | 6461 |
Cracking | 6.14.2 | D661 | 6471 |
Rusting | 6.14.2 | D610 | 6451 |
Checking | 6.14.2 | D660 | 6421 |
Print resistance | 6.15 | D2091 | ... |
Salt spray resistance | 6.16 | B117 | 6061 |
Sanding properties | 6.17 | ... | 6321 |
Water resistance: | |||
High humidity | 6.18.2 | D1735 | ... |
Weldability | 6.19 | ... | A |
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.