M00018127
New product
ISO DIS 5211 2016 Edition, January 28, 2016 INDUSTRIAL VALVES - PART-TURN ACTUATOR ATTACHMENTS
In stock
Warning: Last items in stock!
Availability date: 07/14/2021
Description / Abstract:
This International Standard specifies requirements for the
attachment of part-turn actuators, with or without gearboxes, to
industrial valves.
The attachment of part-turn actuators to control valves in
accordance with the requirements of this International standard is
subject to an agreement between the supplier and the purchaser.
This International standard specifies:
— flange dimensions necessary for the attachment of part-turn
actuators to industrial valves [see Figures 1 a) and 1 c)] or to
intermediate supports [see Figures 1 b) and 1 d)];
— driving component dimensions of part-turn actuators necessary
to attach them to the driven components;
— reference values for torques for interfaces and for couplings
having the dimensions specified in this International standard.
The attachment of the intermediate support to the valve is out
of the scope of this International standard.
NOTE 1 In this standard the term “valve” may also be understood
to include “valve with an intermediate support” [see Figure 1
b)].
NOTE 2 When the part-turn actuator is a combination of a
multi-turn actuator and a gearbox, the multi-turn actuator
attachment to the gearbox is in accordance with ISO 5210 [see
Figures 1 c) and 1 d)].