M00019192
New product
ISO DIS 12614-13 2013 Edition, January 16, 2013 ROAD VEHICLES - LIQUEFIED NATURAL GAS (LNG) FUEL SYSTEM COMPONENTS - PART 13: PRESSURE CONTROL REGULATOR
In stock
Warning: Last items in stock!
Availability date: 07/14/2021
Description / Abstract:
This part of ISO 12614 specifies tests and requirements for the
pressure control regulator, a liquefied natural gas fuel system
component intended for use on the types of motor vehicles defined
in ISO 3833.This part of ISO 12614 is applicable to vehicles using
natural gas in accordance with ISO 15403 (mono-fuel, bi-fuel or
dual-fuel applications). It is not applicable to the following:
a) fuel containers;
b) stationary gas engines;
c) container mounting hardware;
d) electronic fuel management;
e) refueling receptacles.
NOTE 1 It is recognized that miscellaneous components not
specifically covered herein can be examined to meet the criteria of
this part of ISO 12614 and tested according to the appropriate
functional tests.
NOTE 2 All references to pressure in this part of ISO 12614 are
to be considered gauge pressures unless otherwise specified.
NOTE 3 This part of ISO 12614 is based upon a working pressure
for natural gas as a fuel of 1,6 MPa [16 bar1) ]. Other
working pressures can be accommodated by adjusting the pressure by
the appropriate factor (ratio). For example 2 MPa (20 bar) working
pressure system will require pressures to be multiplied by 1,25
1) 1bar=0,1MPa=105Pa;1MPa=1N/mm2