M00019489
New product
ISO DIS 16631 2014 Edition, September 3, 2014 DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS COMPATIBLE WITH PLASTIC (PVC AND PE) PIPING SYSTEMS FOR WATER APPLICATIONS
In stock
Warning: Last items in stock!
Availability date: 07/14/2021
Description / Abstract:
This International Standard specifies the requirements and test
methods applicable to ductile iron pipes, fittings, accessories and
their joints for the construction of secondary water distribution
pipelines compatible with plastic (PVC or PE) piping systems:
— to convey water (e.g. for human consumption, raw water);
— operated with or without pressure;
— installed below or above ground;
— defined according to their external diameter (DN/OD
series).
NOTE In this International Standard, all pressures are relative
pressures expressed in bar).
This International Standard gives specifications for materials,
dimensions and tolerances, mechanical properties and standard
coatings and linings of pipes, fittings and accessories. It also
gives performance requirements for all components including
joints.
This International Standard covers pipes, fittings and
accessories cast by any type of foundry process or manufactured by
fabrication of cast components, as well as corresponding joints in
the size range DN/OD 50 to DN/OD 225 inclusive.
It is applicable to pipes, fittings and accessories which
are:
— manufactured with socketed, flanged or spigot ends for
jointing by means of various types of gaskets (which are not within
the scope of this International Standard);
— normally delivered internally and externally coated.
This International Standard is also applicable to socketed
fittings which include flanged connections.
Pipes and fittings are classified according to pressure (C
Class).
The dimensions of the products according to this International
Standard, in the size range DN/OD 50 to DN/OD 225, are compatible
with those of plastic pipes (ISO 1452-2 for PVC and ISO 4427-2 for
PE). The spigots of plastic pipes used for secondary water
distribution networks can be inserted into sockets of pipes
manufactured according to this International Standard.
The pressure class, C25, will meet or exceed those of plastic
pipes. These pipes can be used to replace or repair existing
plastic pipelines. The spigots and sockets of products defined in
this International Standard in the size range DN/OD 50 to DN/OD 225
are not dimensionally compatible with the products defined in ISO
2531.