ISO DIS 22476-6

Description / Abstract: This document deals with the equipment requirements, execution of and reporting on self-boring pressuremeter (SBP) tests.

NOTE: This document fulfils the requirements for self boring pressuremeter test as part of the geotechnical investigation services according to EN 1997-1 and EN 1997-2.

Tests with the self-boring pressuremeter cover the measurement in situ of the deformation of soils and weak rocks by the expansion and contraction of a cylindrical flexible membrane under pressure.

The SBP is drilled into the ground using an integral self-boring head at its lower end in such a way that the probe replaces the material it removes so creating its own test hole and minimises the disturbance to the soil outside the instrument.

Pressure applied to, and the associated expansion of the probe are measured and recorded so as to obtain the stress-displacement relationship for the soil as tested (see figure 1).

During both boring and testing the data is recorded automatically.