M00000193
New product
ISO/IEC 7811-2 4th Edition, August 15, 2014 Identification cards - Recording technique - Part 2: Magnetic stripe - Low coercivity
In stock
Warning: Last items in stock!
Availability date: 07/13/2021
Description / Abstract:
ISO/IEC 7811 defines the characteristics for identification
cards as defined in Clause 4 of this part of ISO/IEC 7811
and the use of such cards for international interchange.
This part of ISO/IEC 7811 specifies requirements for a low
coercivity magnetic stripe (including any protective overlay) on an
identification card, the encoding technique and coded character
sets. It takes into consideration both human and machine aspects
and states minimum requirements.
Coercivity influences many of the quantities specified in this
part of ISO/IEC 7811 but is not itself specified.
ISO/IEC 7811 provides criteria to which cards are to perform. No
consideration is given within ISO/IEC 7811 to the amount of use, if
any, experienced by the card prior to test. Failure to conform to
specified criteria is negotiated between the involved parties.
ISO/IEC 10373-2 specifies the test procedures used to check
cards against the parameters specified in this part of ISO/IEC
7811.
NOTE Numeric values in the SI and/or Imperial
measurement system in this part of ISO/IEC 7811 may have been
rounded off and therefore are consistent with, but not exactly
equal to, each other. Either system may be used, but the two are
not to be intermixed or reconverted. The original design was made
using the Imperial measurement system.