M00001704
New product
ISO 26203-2 1st Edition, October 15, 2011 Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems
In stock
Warning: Last items in stock!
Availability date: 07/13/2021
Description / Abstract:
This part of ISO 26203 gives requirements for the testing of
metallic materials. Only examples for testing flat geometries are
given; however, other geometries can be tested. The area of
application spans a range of strain rates from 10−2
s−1 to 103 s−1. Tests are carried
out between 10 °C and 35 °C and, unless otherwise specified, using
a servo-hydraulic-type test system.
NOTE 1 Measurements at strain rates lower than 10−2
s−1 c an b e p erformed u sing m achines d esigned f or
q uasistatic testing.
NOTE 2 For test piece geometries other than those shown in 7.1
and Annex B, see ESIS P7 (Reference [1]) and FAT Guideline
(Reference [2]).