M00001819
New product
ISO 13628-15 1st Edition, September 15, 2011 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds
In stock
Warning: Last items in stock!
Availability date: 07/13/2021
Description / Abstract:
This part of ISO 13628 addresses recommendations for subsea
structures and manifolds, within the frameworks set forth by
recognized and accepted industry specifications and standards. As
such, it does not supersede or eliminate any requirement imposed by
any other industry specification.
This part of ISO 13628 covers subsea manifolds and templates
utilized for pressure control in both subsea production of oil and
gas, and subsea injection services. See Figure 1 for an example of
such a subsea system.
Equipment within the scope of this part of ISO 13628 is listed
below:
a) the following structural components and piping systems of
subsea production systems:
— production and injection manifolds,
— modular and integrated single satellite and multiwell
templates,
— subsea processing and subsea boosting stations,
— flowline riser bases and export riser bases (FRB, ERB),
— pipeline end manifolds (PLEM),
— pipeline end terminations (PLET),
— T- and Y-connection,
— subsea isolation valve (SSIV);
b) the following structural components of subsea production
system:
— subsea controls and distribution structures,
— other subsea structures;
c) protection structures associated with the above.
The following components and their applications are outside the
scope of this part of ISO 13628:
— pipeline and manifold valves;
— flowline and tie-in connectors;
— choke valves;
— production control systems.
NOTE General information regarding these topics can be found in
additional publications, such as ISO 13628-1 and API Spec 2C.