SAE AMS4275E Castings, Permanent Mold 6.2Sn - 1Cu - 1Ni Stress Relieved (Stabilized: Aug 2017) standard by SAE International, 08/22/2017
SAE J1915_201708 Recommended Remanufacturing Procedures for Manual Transmission Clutch Assemblies (Stabilized: Aug 2017) standard by SAE International, 08/22/2017
SAE AS5506/3 Architecture Analysis and Design Language (AADL) Annex D: Behavior Model Annex standard by SAE International, 08/22/2017
SAE AS4690D FITTING, TEE, REDUCER, BULKHEAD ON SIDE, FLARELESS AND SHORT FLARELESS standard by SAE International, 08/22/2017
SAE AS4687E FITTING ASSEMBLY, ELBOW, 90¿¿, FLARELESS AND SHORT FLARELESS, REDUCER, RETAINED NUT standard by SAE International, 08/22/2017
SAE AS4668C FITTING, ELBOW, 90¿¿, SHORT FLARELESS standard by SAE International, 08/22/2017
SAE AS15001D FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250-28 TAPER THREADS, STEEL, TYPE I (Stabilized: Aug 2017) standard by SAE International, 08/22/2017
SAE AMS6424G Steel Bars, Forgings, and Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.49 ¿¿¿ 0.55C) standard by SAE International, 08/22/2017
SAE AMS6280M Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.20Mo (0.28 ¿¿¿ 0.33C) (SAE 8630) standard by SAE International, 08/22/2017
SAE AS15004D FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250-28 TAPER THREADS, NICKEL-COPPER ALLOY, TYPE IV (Stabilized: Aug 2017) standard by SAE International, 08/21/2017
SAE AS24466A BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, TRACK ROLLER, TYPE VI, ANTIFRICTION, INCH standard by SAE International, 08/21/2017
SAE AS15005D FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, NICKEL-COPPER ALLOY, TYPE V (Stabilized: Aug 2017) standard by SAE International, 08/21/2017