SAE AMS7464D Bolts and Screws, Steel, Low-Alloy Heat Resistant 222,000 psi (1517 MPa) Tensile Strength Hardened and Tempered, Roll Threaded (Stabilized: Aug 2017) standard by SAE International, 08/17/2017
SAE AMS6528D Steel, Bars 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Special Aircraft Quality Cleanliness Normalized standard by SAE International, 08/17/2017
SAE AMS4553D Brass, Seamless, Tubing 85Cu - 15Zn Annealed (O61) standard by SAE International, 08/17/2017
SAE AMS3793/3C Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 3/4 Inch (19 mm), 0.11 to 0.60 Ounces per Yard (3.4 to 18.6 g/m) standard by SAE International, 08/17/2017
SAE USCAR12-5 Electrical Connector Design Criteria standard by SAE International, 08/17/2017
SAE AS4672D FITTING, TEE, BULKHEAD ON RUN, SHORT FLARELESS standard by SAE International, 08/16/2017
SAE AMS2436D Coating, Aluminum Oxide Detonation Deposition standard by SAE International, 08/15/2017
SAE J1608_201708 Manual Transmission Shift Patterns (Stabilized: Aug 2017) standard by SAE International, 08/15/2017
SAE AS81714/1B TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SIZE 22, SERIES I standard by SAE International, 08/15/2017
SAE AS5714A Minimum Performance Standard for Parts 23, 27, and 29 Aircraft Wheels, Brakes, and Wheel and Brake Assemblies standard by SAE International, 08/15/2017
SAE AS4115A Test Plan for the Digital Time Division Command/Response Multiplex Data Bus System (Stabilized: Aug 2017) standard by SAE International, 08/15/2017
SAE AS31031B CONNECTOR, RECEPTACLE, ELECTRIC, POTTING SEAL, SOLDER CONTACT AN TYPE standard by SAE International, 08/15/2017